ZTE Starry BE3600Pro+: from the heatsink to the radio

The BE3600Pro+ shows why a Wi-Fi 7 label is not the whole product. The teardown records its power, memory, flash, radio, and heatsink choices; those details matter when judging always-on use or firmware prospects.

What the source records

The ACWiFi article records: ZXSLC SR7013; 12V/1.5A; 2x2.5G + 2x1G; ZX279129; 256MB DDR3L; MT7990AN; 128MB NAND. These are observations from the disassembled sample and the author’s test conditions, not a specification for every production batch.

Reading the teardown

I separate the hardware into four layers: power and heat, SoC/memory, firmware flash, and the radio/FEM section. This avoids shortcuts such as “a strong chip guarantees fast Wi-Fi” or “NAND means OpenWrt will install.” Auxiliary chips and heatsinks reveal design choices, but they do not replace real measurements of throughput, latency, or temperature.

HomeLab implications

For an always-on router, power delivery, cooling, and radio firmware matter as much as the Wi-Fi standard on the box. For firmware research, verify the boot chain, console, flash layout, calibration partitions, and actual support status. Do not flash a device just because its SoC looks familiar.

Limits

The figures below describe the sample and conditions documented by the source; another revision or batch may differ.

Source

Source: ACWiFi 33820, published 2026-05-01.